Hewlett Packard Enterprise International. Get the latest from: Can anyone confirm that this version has the fix for the problem mentioned above? The mode parameters in effect for this initiator have been restored from non-volatile memory. If this is the case, no action is necessary. The EMS error event message will appears several times. Tagged commands queued for this initiator were cleared by another initiator.
|Date Added:||28 July 2016|
|File Size:||57.67 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
In case a different kernel function reports the error, figure out to which kernel subsystem or driver this belongs, and check for any known issue and a fix in a newer version.
Hewlett Packard Enterprise
Condition cleared, no intervention required. Tagged commands queued for this initiator were cleared by another initiator.
Yeah I know the firmware might want to be upgraded Get the latest from: This example shows that a mpt function is called.
Here’s a detailed error example:. The device has been reset by a Bus Device Reset message, a hard reset condition, or a power-on reset.
mptconfig – HP-UX
Retrieved from ” http: Alternatively, the mode parameters, microcode, or inquiry data for the device have jx changed.
How to correct Ultra320 SCSI Bus Reset EMS errors
The fix will be released with Fusion. Hewlett Packard Enterprise International. Thanks in advance and any response is appreciated.
The device is in a condition where it requires action on the part of the device driver or a human operator. An IO timeout condition was detected. Version 11i v2 Revision B.
Does this ring a bell with anyone? The mpt scsiU driver needs to be updated.
Yes, that was a very annoying bug in the driver. There is a known issue like this for mpt scsiU driver older than B.
HP-UX: How to get machine information
The driver is now online Jun 18 Any other event that requires the attention of the initiator. I believe it does.
Solution Bp the following command to check which kernel function the messages are related too: I believe it does Thanks in advance and any response is appreciated. Latest mpt driver can be downloaded by searching scsiU from the follwing website: Thanks Bill, Yeah I know the firmware might want to be upgraded The EMS error event message will appears several times.
Click here to access the technical article at: Controller reset has been successfully completed. Example for HP-UX A change in the condition of a synchronized spindle.