Step 2 Attach the Wall Mount Hanger to the wall with the two 8 wood screws provided. The serial label indicates the interface enabled when the scanner is shipped from the factory. If the bar code data displays on the screen while using this program, it only demonstrates that the hardware interface and scanner are working. These limits are designed to provide reasonable protection against harmful interference in a residential installation. The first option is a self- supporting stand that can be moved freely about on the countertop. The default settings of the scanner are , Space, 2, 7 respectively.
|Date Added:||6 June 2013|
|File Size:||68.23 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Metrologic Voyager MS9500 Single Line USB Barcode Scanner Kit
MS Series Specifications mm 7. Eight settings are available for the tone of the beep normal, 6 alternate tones and no tone.
If the command sent metrologicc the scanner in invalid, the scanner will respond with a [nak]. Page 34 Solution Verify that the bar code being scanned falls into the programmed criteria. Simply present a bar code to the scanner; the high-visibility nanometer laser is automatically activated allowing the user to easily select the bar code to be scanned. Solution Verify that the bar code being scanned falls into the programmed criteria. Return the unit for repair to an authorized service center.
Audible Indicators When the Voyager is in operation, it provides audible feedback. Voayger to make sure that the unit is connected to the correct com port on the host device. If an asterisk is not in the default column then the default setting is off or disabled. Try operating the scanner ms500 Alt mode. If a command is sent to the scanner to change any of these settings, the change will NOT take effect until after serial program mode is exited.
Metrologic MS9500 Voyager Installation And User Manual
Non guardate mai il raggio laser, anche se credete che lo scanner non metrilogic attivo. This program is for demonstration purposes only. Comments to this Manuals Your Name. When the Voyager is in operation, it provides audible feedback.
The default settings of the scanner areSpace, 2, 7 respectively. Metrologic instruments single-line hand held laser scanner installation and user’s guide ms 44 pages.
Metrologic Voyager Ms Scanner NOS W/ Manual | eBay
Many RS programmable functions available in other Metrologic scanners are also available as keyboard wedge functions. The scanner defaults to a minimum of 3 character bar code. Eclipse ms series single-line hand-held laser scanner 40 pages.
Minimum Bar Code Element Width To print the manual completely, please, download it. Press the CodeGate button and the data is transmitted to the host system.
Table of Contents Add to my manuals Add. Qty 1 MLPN f. If the command sent to the scanner is valid, the scanner will respond with an [ack]. Abbreviated Ascii Table The scanner will beep three times!
Don’t show me this message again.
If the bar code data displays on the screen while using this program, it only demonstrates that the hardware interface and scanner are working. It is only intended to prove that cabling is correct, the COM port is working, vlyager the scanner is working.
The first option is a self- supporting stand that can be moved freely about on the countertop. Ms series voyager rf single line hand-held rf bar code scanner installation and user’s guide 20 pages. Don’t have an account? At power up the unit beeps 2 times and alternately flashes the LEDs. When the scanner is emtrologic, the flashing or stationary activity of the LEDs indicates the status of the current scan and the scanner.
Page 35 Caps Lock.